Bob's 2002 rebuild
April 24, 2005

I have decided to use aluminum for the sides of the wing.
	Next I set the saw just a tad less then the aluminum
	Then I filed the edges round
	Sanded the finish with 120 grit sand paper
Drilled the holes and cleaned the metal with alcohol
	Next a few coats of clear paint
Sanded with 800 grid sand paper and buffed them by hand
Some more LEDs going into the tail lights to light up  the bottom of the tail light
I have also mounted the remote receiver for the  Morphics lighting system under the license plate
Had to cut off a couple of the feet off the revolving light that will be mounted under the rear bumper
Top of  the page
Back to Track Photos Home page